高阶魔方复原教程

吉祥河工

魔方高阶产品复原教程

本教程是最流行的高阶魔方复原方法，即“降阶法”，先把高阶魔方的中心块合并、棱块合并后，再按照三阶魔方的还原思路进行还原。对于偶数阶魔方，则需要再对应特殊情况进行复原。

This tutorial is the most popular method for solving higher-level Cube, known as the "Level reduction method". First, solve the center blocks and pair up edges of the higher-level Cube, and then follow the solve the cube as if it were a 3x3x3 Cube. For even order Cube, it needs to be solved according to parity,as OLL parity &PLL parity.

四阶魔方复原教程

(1) 复原中心

(2) 合并棱块

(3) 按三阶复原

(4) 处理特殊

solve the pari up the solve as solve the

center blocks edge blocks the 3*3*3 cube parity cases

复原六面中心

Solve all center blocks

由于四阶魔方没有固定中心块，所以我们要熟记它的标准配色(上黄下白，前蓝后绿，左橙右红)。复原的顺序为，先复原一组对面中心块，再逐个复原四周中心块。在复原每对中心块时，不破坏已经复原的中心块，且通过任意方法让更多块归位，或先调整为以下对应情况进行复原。

Since the 4*4*4 cube has no fixed center block, we should remember its standard color matchin(yellow at the top and white at the bottom, blue at the front and green at the back, orange at th left and red at the right). The order of solving is to first solve a set of opposite central blocks, an then solve the surrounding central blocks one by one. When solving each center blocks, it doe: not damage the already solved center blocks, and more blocks can be repositioned by an method, or adjusted to the following cases for solving.

情况一(case 1): TR U'TR'

如果所需不在相邻面，可以通过以下任意方法调整到相邻面，或改变TR为

TR2进行操作。目标位置在上面。

情况二(case 2): TR U2 TR'

If the desired area is

not on adjacent , you can adjust it to this face using any of the following methods,or change TR to TR2 for operation.

情况三(case 3): TR U TR' TL'UTL

情况四(case4): TRU TR' U' TR U2 TR'

情况五(case 5): TR U2 TR'F TR U'TR'

2 合并全部棱块Pair up matching edge blocks

这个步骤中，需要逐个找到相同的棱块一一合并。找到所需块后，首先调整为以下状态，再对应情况进行复原。

In this step, it is necessary to find the matching edges one by one and pair up them one by one. After finding the required blocks, first adjust to the following case, and then solve according to the situation.

或 or

情况一(case 1): TU'RUR'FR'F'R TU

情况二(case 2):L2 TD2 RUR'FR'F'R TD2

或叮

3按照三阶魔方复原

Solve according to 3x3x3 Cube

这个步骤只需把复原的中心和合并的棱块分别作为三阶魔方的中心块和棱块，再按照三阶魔方的方法复原即可。直至遇到一组棱块始终无法复原，或有且只有两组棱块需要交换，则跳转到下一步，对应情况进行复原。

This step only needs to use the solved center blocks and the pairing up edge blocks as the center and edge blocks of the 3*3*3 Cube, and then solve them according to the method of the 3*3*3 Cube. Until only one set of edge cannot be solved, or two sets of edges that need to be solved, skip to the next step and solve accordingly.

复原特殊情况

Solve OLL &PLL Parities

MR2 B2 U2 ML U2 MR' U2 MR

OLL Parity

U2 F2 MR F2 ML' B2 MR2

PLL Parity MR2 U2 MR2 TU2 MR2 MU2

五阶魔方复原教程

(1) (2) (3)

按三阶复原

复原六面中心

合并棱块

solve the pari up the solve as

center blocks edge blocks the 3*3*3 cube

复原六面中心Solve all center blocks

情况一(case 1): TR U TR'U TR U2 TR'

情况二(case 2):TRUM'U'TR'UM

2 合并全部棱块

Pair up matching edge blocks

这个步骤中，需要逐个找到相同的棱块一一合并。找到所需块后，首先调整为以下状态，再对应情况进行复原。

In this step, it is necessary to find the matching edges one by one and pair up them one by one. After finding the required blocks, first adjust to the following case, and then solve according to the situation.

或 or

情况一(case 1): TU'RUR'FR'F'R TU

情况二(case 2):L2 TD2 RUR'FR'F'R TD2

3按照三阶魔方复原Solve according to 3x3x3 Cube

像五阶魔方等奇数阶高阶魔方，复原中心及合并棱块后，直接按照三阶魔方复原即可。 After solving the center and pairing up the edges of odd higher level Cube, as the 5*5*5Cube, yo can directly solve it according to the 3*3*3 Cube.

更高阶魔方复原

重要提醒:更高阶魔方也是同样的思路进行还原，灵活理解思路，而非生搬硬套公式。复原中心时，可以一圈一圈地递进复原;合并棱块时，也可先合并更靠近内部的棱块，再合并外边的棱块。

Important reminder: Higher level Cube is also solved using the same method, with a flexible understanding of the ideas, rather than blindly applying formulas. When solving the center, you can gradually solve it circle by circle; When pairing up edges, it is also possible to first pair up edges closer to the inside, and then pair up edges on the outside.